XP DEUS Accessories

Where to Buy MSRP $150.00 USD/CAD MAP: $127.50 Part Number: PPOINTER-MI4

The XP MI-4 Waterproof Pinpointer is for everyone!

Use alongside any metal detector. The MI-4 is waterproof to 6 meters for use on land and in both fresh and salt water environments. Includes a built in Rechargeable Battery System, Lanyard and Holster. Premium quality, backed by a full 2 year warranty.

My experience with the XP Waterproof Pinpointer has been in some of the most mineralized soils in the USA - Northern, Virginia. The performance is excellent! It makes locating Civil War relics in the plug very easy. Many other brands of pinpointers have a significant reduction in performance in this hot red clay. This pinpointer handles these tough conditions much better than most due to its ground balancing feature." - Keith Leppert, Fort Bedford Metal Detectors, Alum Bank, PA

XP MI-4 Pinpointer Standard Features

Access all functions with 1 single button
All round 360°
Fast re-tune
Loudspeaker (1) & Vibration
LED (2) ON/OFF
3 Levels of Sensitivity

XP MI-4 Advanced Features

Waterproof up to 6 meters
Landyard with stainless ring
Rechargeable lithium battery
Ergonomic rubber (3)
2 audio modes PITCH or PULSE
Parts totally replaceable
7 programs
Rotating holster (4)


MI-4 Pinpointer Field Replaceable Accessories

  • XP MI-4 Pinpointer Screw

    One replacement Screw for use with the XP MI-4 Pinpointer. Please note that screws are sold by the piece.

    Where to Buy MSRP $3.00 USD/CAD MAP: $2.00 Part Number: VIS2.2X9.5TF
  • XP MI-4 Pinpointer MI-4 Vibrate Mechanism

    Replacement Vibrate Mechanism for the XP MI-4 Pinpointer. Please note that this item is sold by the piece.

    Where to Buy MSRP $17.00 USD/CAD MAP: $15.00 Part Number: PPVIBR
  • XP MI-4 Pinpointer Circuit Board with Battery

    Replacement Circuit Board with Battery for the XP MI-4 Pinpointer.

    Where to Buy MSRP $165.00 USD/CAD MAP: $150.00 Part Number: PP-S-CIRCUIT
  • XP MI-4 Pinpointer Replacement Control Housing

    Replacement Control Housing for XP MI-4 Pinpointer

    Where to Buy MSRP $55.00 USD/CAD MAP: $50.00 Part Number: PP-S-BODY
  • XP MI-4 Pinpointer Toric Washer

    Replacement Toric Washer for the XP MI-4 Pinpointer

    Where to Buy MSRP $5.00 USD/CAD MAP: $4.00 Part Number: PPJTORY
  • XP MI-4 Pinpointer Flat Washer

    Replacement XP MI-4 Pinpointer Flat Washer for the XP MI-4 Pinpointer. Please note that washers are sold by the piece.

    Where to Buy MSRP $6.00 USD/CAD MAP: $5.00 Part Number: PPJPLAT
  • XP MI-4 Pinpointer Holster

    Replacement Holster for the XP MI-4 Pinpointer

    This holster fits on your belt to easily carry the XP MI-4 Pinpointer.

    Where to Buy MSRP $28.00 USD/CAD MAP: $25.00 Part Number: PPCASE2
  • XP MI-4 Pinpointer MI-4 Top Cap

    This is an accessory for use with the XP MI-4 Pinpointer. This Replacement End Cap fits the XP MI-4 Pinpointer to securly close the pinpointer.

    Where to Buy MSRP $21.00 USD/CAD MAP: $19.00 Part Number: PPCAP
  • XP MI-4 Pinpointer Plastic Assembly for Vibrate Unit

    This Replacement plastic assembly for vibrate unit fits the XP MI-4 Pinpointer. This is an accessory for use with the XP MI-4 Pinpointer.

    Where to Buy MSRP $9.00 USD/CAD MAP: $8.00 Part Number: PPBLOCVIB
  • XP MI-4 Pinpointer Lanyard

    This lanyard attaches to the end of the XP MI-4 Pinpointer to securely attach the pinpointer to your belt loop.

    Where to Buy MSRP $14.00 USD/CAD MAP: $13.00 Part Number: PPATTACH